Table 1.3 Current And Power Dissipation - Fujitsu MHX2300BT Product Manual

Device Overview
(5) Current Requirements and Power Dissipation
Table 1.3 lists the current and power dissipation (typical).
Spin up (*1)
Idle (*6)
R/W (on track) (*2)
Seek (*5)
Standby (*6)
Sleep (*6)
Energy
Efficiency (*4)
*1 Maximum current and power at starting spindle motor.
*2 Current and power level when the operation (command) that accompanies a
transfer of 63 sectors is executed 3 times in 100 ms
*3 Power requirements reflect typical values for +5 V power.
*4 Energy efficiency based on the Law concerning the Rational Use of Energy
indicates the value obtained by dividing power consumption by the storage
capacity. (Japan only)
*5 The seek average current is specified based on three operations per 100
msec.
*6 IPM mode: Slumber mode.
1-8

Table 1.3 Current and power dissipation

Typical RMS Current
0.9 A
100 mA
320 mA
380 mA
26 mA
26 mA
—
Typical Power (*3)
4.5 W
0.50 W
1.6 W
1.9 W
0.13 W
0.13 W
0.0017 W/GB (rank E / MHX2300BT)
0.0020 W/GB (rank E / MHX2250BT)
C141-E254