Locking The Doors/Liftgate; Opening The Liftgate Window; Car Finder; Sounding A Panic Alarm - Ford Explorer 2010 Owner's Manual

Hide thumbs Also See for Explorer 2010:

Table of Contents

Available languages

Locking the doors/liftgate

and release to lock all the doors and liftgate. The lamps will

flash. Note: If any door, the liftgate or the liftgate window are not closed

properly, the lamps will not flash.

and release again within three seconds to confirm that all the

doors are closed and locked. Note: The doors will lock again, the horn

will chirp and the lamps flash once.

Note: If any door, the liftgate or the liftgate window are not closed

properly, the horn will make two quick chirps.

to unlatch the liftgate window.

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate

your vehicle, rather than using the panic alarm.

to activate the alarm. The horn will sound and the parklamps

will flash for a maximum of three minutes. Press again or turn the

ignition to the on position to deactivate, or wait for the alarm to timeout

in three minutes.

Note: The panic alarm will only operate when the ignition is in the off

Memory seats and adjustable pedals feature (if equipped)

The remote entry system can also control the memory seat/adjustable

pedals/easy entry-exit feature.

to automatically move the seat and adjustable pedals to the

desired memory position (the seat position corresponds to the

transmitter being used).

2010 Explorer (exp)

Owners Guide, 2nd Printing

Locks and Security

Show Quick Links

Table of Contents