Software; Maintenance - Airmar PB200 Owner's Manual & Installation Instructions

Software

Installing the Software
Follow the instructions in the WeatherCaster™ Software Guide.
Software Updates
Airmar may release updated versions of the firmware. The latest revision will be
available for download through an email to you, from Airmar's website,
www.airmar.com, or a CD can be mailed by Airmar's technical support personnel.

Maintenance

Since the WeatherStation Instrument has no moving parts, it requires minimal
maintenance.
CAUTION: Do not disassemble the sensor. Removing the screws from the
WeatherStation Instrument will damage the waterproof seal, thus voiding the
warranty.
CAUTION: Do not immerse in water or pressure wash. Doing so may allow water
to infiltrate the WeatherStation instrument, voiding the warranty.
CAUTION: The blue metal plate and the blue waterproof film found in the wind
channel of the WeatherStation Instrument are essential to its operation (see
Figure 9). The blue waterproof film protects the transducers, so be careful to keep
it intact. Do not to scratch the metal plate or damage it in any way.
CAUTION: Keep the wind channel free of SPIDER WEBS, insects, dirt, and other
debris.
18
Figure 9. Wind channel
Copyright © 2008 Airmar Technology Corp.
waterproof film
wind channel
blue metal plate