Figure 7. Reinstalling the screw to secure the system stand hinge cover to the computer
Removing and reinstalling the system stand
Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety
information" in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the
Safety, Warranty, and Setup Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove and reinstall the system stand.
To remove and reinstall the system stand, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the system stand hinge cover. See "Removing and reinstalling the system stand hinge cover"
on page 73.
.
Chapter 9
Replacing FRUs
75