Datalogic PowerScan RF SR User Manual page 27

User's Guide
Table 2. Scanner YELLOW LED Functions
LED
INDICATION
On Steady
Laser on indica-
tion
Table 3. Scanner BEEPER Functions
SPEAKER
INDICATION
Six beeps consisting of 20 ms
Scanner Not
on, 20 ms off
Currently
Linked
100 ms on (short)
250 ms on (medium)
Good Read
Beep
500 ms on (long)
20 ms on
Partial Read
Bip
100 ms on (short)
Base Station
250 ms on (medium)
Acknowledge-
ment Beep
500 ms on (long)
DURATION
DURATION
COMMENT
The yellow LED illuminates
whenever the laser is on.
COMMENT
Indicates a bar code was
read before the scanner
was linked to a Base Sta-
tion.
Three programmable func-
tions are available. This
indicates a bar code has
been read and decoded.
A very short beep ("bip") is
sounded when one bar
code of a two-bar code pair
has been successfully
decoded.
Indicates a successful bar
code transmission to the
host (configurable), a suc-
cessful change of channel,
or a successful transmis-
sion of a new configuration
to the host.
19