Dual XML8110 Installation & Owner's Manual page 9

Balance
XML8110 OPERATION
1m"
General Operation
Audio Press AUDIO/MENU momentarily to select between Bass.
Treble. Balance. Fader. EO. Subwoofer* and Source Volume
Level.
C
BASS ~ TREBLE ~ BALANCE ~ FADER ~ EQ ~ SUBWOOFER' ~ SOURCE LEVEL - ,
Bass Press AUDIO/MENU until Bass appears. then rotate the
volume knob left/right to adjust (-6 minimum / +6 maximum).
Treble Press AUDIO/MENU until Treble appears. then rotate the
volume knob left/right to adjust ( -6 minimum / +6 maximum).
Note: Any adjustment to the Bass or Treble settings are
automatically saved as the User EO.
Bass and Treble settings are retained for each mode
individually.
Press AUDIO/MENU until Balance appears. then rotate the
volume knob left/right to adjust L12 (left) to R12 (right),
Balance L=R represents equal balance.
Fader
EQ
Source Volume Level
Subwoofer
Press AUDIO/MENU until Fader appears. then rotate the
volume knob left/right to adjust (F12 (front) to R12 (rear).
Fader F=R represents equal fader.
Press AUDIO/MENU until EQ appears. then rotate the volume
knob left/right to select between Flat. Pop. Rock. Jazz. Classic.
Beat or User equalization curves. Any adjustment to the Bass
or Treble settings are automatically saved as the User preset
EO.
The source volume level control allows a gain adjustment for
each audio source: AM. FM. Auxiliary input. operation of iPod
and Bluetooth. Set the source volume level for each mode.
depending on the relative volume of each audio source.
To set the source volume level. press AUDIO/MENU until
SRC LEVEL appears. After one second. the current mode will
appear on the display. Turn the volume knob to adjust the
audio level of the current source (-6 minimum/+6 maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation. press MODE until the
desired mode is selected. then set the source volume level for
that mode.
Press AUDIO/MENU until Sub-W appears. then press SELECT
to confirm. Rotate volume knob left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
9