Dual XML8110 Installation & Owner's Manual page 15

XML8110 OPERATION . .
Bluetooth® Operation
Press \,. once. "Enter Number" will be shown. then An "_" will
appear on the display.
Input the desired phone number using the 0-9.
*. #
buttons on the
remote controL. Press \,. to begin dialing.
A phone call may also be placed from your mobile device using
the keypad. phone book or speed diaL. When a call is placed from
a mobile device. "DIALING" will appear on the head unit display.
Making a Phone Call
t------------:.----=-----------I
If an incoming call is detected. the head unit will automatically
switch to Bluetooth mode. muting any current audio.
Receiving a Phone
Call
The incoming phone number will scroll across the display. the
phone icon will flash on the display. and a ring tone will be
audible from the vehicle speakers. See Bluetooth Settings for
speaker configurations.
Note The ring audio level will depend the mobile device and head
unit ring volume and audio settings. If the ringer on the mobile
device is off. you may not hear an incoming ring tone.
Press \,. to receive a calL. The phone icon in the display will
illuminate.
The head unit will display the elapsed time of the phone call.
The volume knob will adjust the volume of the calL.
Press ~ to mute the BTM60's microphone during a call.
During a Phone Call
t------------':....----------------I
Refusing a Call
To refuse an incoming phone call. press and hold" for 3
seconds.
Hold" for 3 or more seconds to end a call.
Ending a Phone Call If the phone call was received. the head unit will return to
previous mode when call is ended.
15