Central Unlocking/Two-Stage Unlocking For Intelligent Access Keys; Autolock Feature; Deactivating/Activating Autolock Feature - Ford Taurus 2010 Owner's Manual

Hide thumbs Also See for Taurus 2010:
Table of Contents

Advertisement

automatically be released when you attempt to close it, and the horn will
chirp, as a reminder that the IA key is inside. If you would like to
intentionally lock your IA key in the trunk of your vehicle, first disarm
the perimeter alarm by unlocking the vehicle, then place the IA key in
the trunk, close the trunk, and rearm your perimeter alarm system by
locking the vehicle using your keyless entry keypad or another IA key.
For more information on arming/disarming of the perimeter alarm
system, refer to Perimeter alarm system in this chapter.

Central unlocking/Two-stage unlocking for intelligent access keys

(if equipped)
When unlocking the driver door with the key, turn it once toward the
rear of the vehicle to unlock that door only, if the two-stage unlocking is
enabled. Turn the key a second time to unlock all doors.
Two-stage unlocking may be disabled and re-enabled (to allow all vehicle
doors to unlock simultaneously) by simultaneously pressing
the
and
controls on the transmitter for four seconds.
Note: The turn lamps will flash twice to confirm that a change to the
feature has occurred.

Autolock feature

The autolock feature will lock all the doors when:
• all the doors are closed,
• the ignition is in the on position,
• you shift into any gear putting the vehicle in motion, and
• the vehicle attains a speed greater than 12 mph (20 km/h).
The autolock feature repeats when:
• any door is opened then closed while the ignition is in the on position
and the vehicle speed is 9 mph (15 km/h) or lower, and
• the vehicle then attains a speed greater than 12 mph (20 km/h).

Deactivating/activating autolock feature

Your vehicle comes with the autolock features activated; there are four
methods to enable/disable this feature:
• Through your authorized dealer,
• by using a power door unlock/lock procedure,
• using a keypad procedure, or
• by using the instrument cluster message center. Refer to Message
center in the Instrument Cluster chapter.
2010 Taurus (500)
Owners Guide, 3rd Printing
USA (fus)
Locks and Security
121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents