Russell Hobbs 14617 Instructions Manual

Brushed nevada kettle

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Summary of Contents for Russell Hobbs 14617

  • Page 1 instructions...
  • Page 3: Important Safeguards

    Read the instructions and keep them safe. If you pass the kettle on, pass on the instructions too. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: 1 The kettle must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.
  • Page 4: Keeping Warm

    filling caution keep clear, steam may escape from the lid 4 Remove the kettle from the stand. 5 Press and release the lid button, to open the lid. 6 Fill with at least 2 cups of water, but not above max. 7 If you overfill, the kettle may spit boiling water.
  • Page 5: Water Filter

    30 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam used to switch off automatically, which then condenses and escapes via vents under the kettle. 31 You may see some discolouration on the floor of the kettle. Again, don’t worry – it’s due to the bonding of the element to the kettle floor.
  • Page 8: Connection

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents