Download Print this page

Russell Hobbs 14556 Instructions Manual

Filter kettle

Advertisement

instructions

Advertisement

loading

Summary of Contents for Russell Hobbs 14556

  • Page 1 instructions...
  • Page 3: Important Safeguards

    Read the instructions and keep them safe. If you pass the kettle on, pass on the instructions too. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: caution In common with many other water filter cartridges, this one releases generally harmless, low levels of potassium, and trace levels of silver.
  • Page 4 hot or cold? You can use the filter to filter water for cold drinks too. You don’t need to buy a water filter jug, use the kettle – just don’t switch it on. , Don’t put the kettle in the fridge – transfer the water to a fridge-proof container. before using the kettle for first time.
  • Page 5: Fill The Reservoir

    rinse the filter 25 Fill the reservoir with about a litre of water. 26 Wait till it runs through the filter, then discard the water. 27 Fill again, discard the water, and it’s ready for use. everyday use 28 Put the stand on a stable, level surface. 29 Route the cable so it doesn’t overhang, and can’t be caught or tripped over.
  • Page 6 3 Wipe the stand with a damp cloth. 4 Keep all connectors and sockets dry. 5 Don’t put the kettle or stand in liquid. 6 Don’t use harsh or abrasive cleaning agents or solvents. descale regularly – even in soft water areas 7 Limescale may be white, coloured, even rusty-looking, but it’s normally visible.
  • Page 8: Connection

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.