Table of Contents
Advertisement
5
Insert the expansion card into the slot.
Insert the expansion card into the slot, and secure it with the screw removed in Procedure 4.
6
Install the expansion card mounting bracket.
Secure it with the two screws you have removed in Procedure 3.
7
Reinstall the upper cover.
Point
To remove the expansion card, use the installation procedure in the reverse order.
8
Plug the PC.
9
Turn on the PC.
The system configures the device driver and resource to enable the expansion card.
Point
•
The device drivers automatically selected by the Plug & Play functions are those included in
the Windows XP/2000. Device drivers for some of expansion cards and peripherals are not
included. If so, use a CD-ROM containing the device driver supplied with the expansion card
and install it by following the messages.For more information, refer to the manual provided
with the expansion card and peripherals.
•
Before using the installed expansion card, use Device Manager to check whether the device
driver is installed.If not, delete the device driver and then reboot the Windows XP/2000.
62
Advertisement
Table of Contents
