Cds; Notes On Handling - Fujitsu DESKPOWER C600 Series User Manual

Hide thumbs Also See for DESKPOWER C600 Series:
Table of Contents

Advertisement

3 CDs

This section describes how to handle, insert, and remove a CD.

Notes on Handling

Follow the following guidelines to prevent faults when handling a CD.
Guidelines for CD Media
Apply no label to any side of the disk. Do not use a ballpoint pen or pencil.
Do not touch or damage the data side.
Do not bend the disk or put a heavy object on it.
If the disk has dirt or water droplets, use a damp cloth to wipe them off and clean the disk with
a dry cloth. Always wipe the disk along the radius.
Keep the disks dry.
Do not place the disks in an extreme temperature environment.
Do not place the disks in a humid and dusty environment.
Notes on Using the Drive
Do not use the CD, if it is not safeguarded according to "Handling guidelines for CD media"
above, or it has bends, cracks, or fissures. Otherwise, a fault may occur. The warranty is not
applied to any failure caused by the use of such CDs.
This PC accepts only round CDs. Do not use odd-shaped CDs. Otherwise, a fault may occur.
The warranty is not applied to any failure caused by the use of CD in a variant shape.
Use of a commercially available CD-ROM drive cleaning disk may put dusts on the lens. Do
not use a CD-ROM drive cleaning disk.
Point
A CD-ROM is the same as a music CD (compact disc) except it has computer information
(characters) instead of sound. ROM stands for Read Only Memory. This PC can read data
from CD-ROMs but cannot write data, except when CD-R/RW is selected .
This PC accepts any CD that has one of the following marks. Do not use the CD if it does not
carry any of them. Or, it may cause a failure. An additional application may be necessary to
use particular types of CDs.
*1
You can write on the CD if you have a CD-R/RW drive.
*2
If you write data at 8X speed or higher, you need to have a high speed-ready drive.
40

Advertisement

Table of Contents
loading

Table of Contents