NETGEAR ProSafe WC7520 Reference Manual page 91

Figure 45.
2. Click a tab to select a profile group.
3. Click a tab to select a radio.
4. Select the Turn Radio On check box to enable configuration of the wireless settings.
Note: If automatic channel allocation is enabled on the Channel Allocation
screen (see
the wireless settings on the Advanced Wireless Settings screen. You
need to disable automatic channel allocation to be able to configure
the wireless settings.
Note: You cannot configure the wireless settings if there are no access
points assigned to a radio in a profile group.
5. Configure the settings as explained in
ProSafe 20-AP Wireless Controller WC7520
Configure Channels on page 92), you cannot configure
Table 20
Configuring Wireless and QoS Settings
91
on page 88.