Making Camera Settings from a Web Browser
You can change the camera settings from a web browser.
1
Tap "MENU".
(Operation on this camera)
PLAY
.
The shortcut menu appears.
0
2
Tap "Wi-Fi" (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap "NETWORK SETTINGS".
(Operation on this camera)
Wi-Fi
NETWORK SETTINGS
.
4
Tap "SET FROM WEB BROWSER".
(Operation on this camera)
NETWORK SETTINGS
SET FROM WEB BROWSER
.
5
Check the SSID and PASS shown on the camera's screen, then register
them on the computer to connect.
(Operation on this camera)
SET FROM WEB BROWSER
CONNECT USING Wi-Fi
SSID:********************************
PASS:********************************
********************************
QUIT
.
When the computer is connected to the camera, a URL appears on
0
the camera.
6
Check the URL shown on the camera's screen, then enter it on the
Internet Explorer (web browser).
(Operation on this camera)
REC
MENU
MENU
WPS
SET FROM WEB BROWSER
CHANGE SETTING BY CONNECTING
TO THE FOLLOWING URL
FROM YOUR WEB BROWSER
http://***.***.***.***:*****/
.
To exit, tap "QUIT".
0
You can change the Wi-Fi function of the camera from a web
browser.
"Adding/Changing/Deleting an Access Point" (A p. 52)
" OUT MONITORING SET " (A p. 53)
" Wi-Fi DIRECT SETTING " (A p. 53)
"Mail Setting" (A p. 53)
Using Wi-Fi
QUIT
51