If Something Doesn't Work - Zanussi TL 984 C1 Instruction Manual

IF SOMETHING DOESN'T WORK ?

Problems Problems Problems
Problems Problems
The wash results are not as usual The wash results are not as usual The wash results are not as usual
The wash results are not as usual The wash results are not as usual
The washing cycle is very much too long. The washing cycle is very much too long. The washing cycle is very much too long.
The washing cycle is very much too long. The washing cycle is very much too long.
The washing machine stops during a The washing machine stops during a The washing machine stops during a The washing machine stops during a The washing machine stops during a
washing cycle. washing cycle. washing cycle.
washing cycle. washing cycle.
The machine does not start up The machine does not start up The machine does not start up
The machine does not start up The machine does not start up
The machine does not drain and/or does The machine does not drain and/or does The machine does not drain and/or does The machine does not drain and/or does The machine does not drain and/or does
not spin not spin not spin
not spin not spin
The machine does not fill The machine does not fill The machine does not fill The machine does not fill The machine does not fill
34
Solutions Solutions Solutions Solutions Solutions
Check that :
was the wrong quantity or the wrong detergent
added ? Insufficient detergent leads to grey
washes and scale deposits in the machine. Check
the quantities more exactly.
were special stains pre-treated ?
were programme and temperature correctly
chosen?
Check that :
the water pression is sufficient.
the pump filter is not obstructed.
there has not been a power breakdown.
Check that :
the water pression is sufficient.
the pump filter is not obstructed.
the mains fuse is intact.
there is not a rinse hold ending a washing
programme (see page 28).
Check that :
the mains fuse is intact.
the appliance is plugged in.
the lid is firmly shut.
the programme selector dial is correctly
positioned.
the beginning of the programme has been ordered
(on/off pushbutton pushed on).
there has not been a power breakdown.
Check that :
the drain hose is not squashed or bent.
the drain filter is not clogged.
Check that :
the inlet water hose is opened and the water
pression is sufficent.
the lid of the appliance is closed.
there has not been a breakwater.