Trouble Shooting - Techness Run 200 User Manual

If the belt shifts to right, tighten the right bolt and loosen the left bolt by using 6mm Hexagonal
Wrench, until the belt is centered itself; If belt shifts to left, tighten the left bolt and loosen the right
bolt by using 6mm Hexagonal Wrench, until the belt is centered. When adjusting the belt using the
6 mm Hexagonal Wrenches, it is important to adjust the belt in half turn increments. Over adjusting
the belt can cause damage to the mat.

5. TROUBLE SHOOTING

This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off
automatically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch off,
waiting for 1 minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the self-checking
analyze (please refer to Self-Checking) to distinguish what type of error problem the machine is
encountering.
Before attempting any work on the treadmill, ensure that the power is off and the plug is
removed from the power point.
Do not use extension leads as it may lead to power decrease and failure.
15