Table of Contents
Advertisement
INSTAllATION
OFF
ON
Figure 14
ST1076
CAM LOCKS
Chimney Liner
Flue
Collar
Figure 15
Figure 16
ST1075
c cast baffle
63D4004
ST1076
ST1077
ST1077
Non-removable Baffle
attach chimney liner
C-Cast Baffle
1
2
ST1075
FAN WIRINg CONvERSION FROM RIghT
TO lEFT
1. Remove ash lip and shroud by lifting straight up. NOTE:
The ash lip and shroud are held in place by a keyhole
slot and bolt system. Lifting up on the ash lip allows the
bolt head to slip through the keyhole.
Ashlip and
Shroud
Figure 17
ST1078
remove ashlip & shroud
Bolt
2. Disconnect ground from side of insert and unplug spade
connectors from plug wire.
ST1079
3. Feed wire through holes in side and front of insert. (Be
bolt and keyhole
sure to leave it connected to the fan.) Push wire through
opposite side, reconnecting ground and plug wires.
Snapstat
bottom view
Figure 19
ST1080
snapstat
SSI30 Wood Insert
Figure 18 -
The ashlip and
shroud are held in
place by a keyhole
slot and bolt
system. Lifting up
n the ash lip allows
the bolt head to
slip through the
key hole.
ST1079
Keyhole
ST1078
ST1080
13
Advertisement
Table of Contents
