Hayter T424 Operator's Manual page 67

1.67
GRASS CUTTING FAULTS
FAULT
Excessive bottom blade
wear..
GRASS CUTTING FAULTS
Continued.
POSSIBLE CAUSE
Bottom blade in heavy
ground contact.
Cutting edges of the cutting
cylinder/bottom blade
are rounded.
Cylinder is in heavy
contact with the bottom
blade.
Damaged cutting cylinder or
bottom blade.
Excessively abrasive ground
conditions.
REMEDY
Raise height of cut.
Backlap or regrind to restore
cutting edges.
Readjust the cutting cylinder to
the bottom blade.
Regrind or replace as necessary.
Raise height of cut.
953910KG141004
1.67