Speaker Setup - Kogan KABRP3DWFIA User Manual

Setup – customizing setting in the main menu
Specific setting method and description
Menu Submenu
Audio
output
SACD
output
Speaker
setup
Audio
Item
DRC
set the dynamic
compression to ON/OFF
SACD
Priority
Configuration
(select according to
connected speaker and
power amplifier)
Setting and description
ON (enable dynamic output compression
OFF (disable dynamic output compression)
Auto
Dynamic range is the difference between the
minimum audio strength higher than device noise
and the maximum audio strength before
distortion. Enable dynamic compression for
viewing during the night.
Multi-channel
2-channel
5X (configuration when seven channels are
connected)
First step: select the audio channel mode
L/R: select this option if your power amplifier is
compatible with Dolby Pro Logic;
Stereo: select this option if the player is
connected to stereo power amplifier.
Second step: select the quantity of bass:
None: select this option if there is no bass
speaker;
Single: select this option if there is bass speaker.
Third step: select the speaker to be set
If the bass quantity is "None": you can select to
set left/right speaker;
If the bass quantity is "Single": in addition to the
speaker, you can also set bass speaker;
Fourth step: set the selected speaker as follows:
Size: set according to speaker size, select large if
the cross section area is larger than or equals to
16cm2, or else select small;
Tuning: adjust the audio output strength of the
speaker in the range -10~10dB.
Delay: set the distance between the speaker and
the listener by 5cm in the range 0~1000cm.
22