Kogan KABRP3DWFIA User Manual page 21

Setup – customizing setting in the main menu
Specific setting method and description
Menu Menu Submenu Submenu
Display
TV
Item Item
TV Screen
(set the aspect ratio
matching the connected
TV set)
Resolution
(set the video output
resolution)
TV system
Setting and description Setting and description
the horizontal direction of the output signal will
remain unchanged, and the vertical direction will
be compressed to 9/16 of the horizontal width.
When connected to 4:3 TV, select:
4:3 panoramic
The left side and right side of 16:9 image will be
cut to fit the 4:3 screen, the image quality remains
unchanged, but the left and right edges are cut off.
4:3 letterbox
The top and bottom of 16:9 image are black to fit
the 4:3 screen, but the image quality reduces
because the scanning lines are reduced.
Set the resolution of display device. Number 480
and 720 indicate the resolution lines of video
output, I (interlaced) or P (progressive) indicate
the scanning mode of video output.
Auto
The player checks and selects optimized
resolution automatically.
480I/576I
480P/576P
720P
1080I
1080P
Resolution setting
The resolution has been changed. Save?
Restore 12 S OK
After the resolution is adjusted, above dialog box
pops up; if you are satisfied with the adjusted
resolution, select [OK], or else select [Cancel]; if
you don't select in 12s, the player reverts to the
original setting.
According to the selected video output terminal,
the appropriate resolution is also different; please
set according to video output instructions.
Set the system of the output TV signal
NTSC
PAL
Multi
19
Cancel