Integrated Graphics - Gigabyte GA-F2A78M-D3H User Manual

& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` GFX Configuration
& Primary Video Device
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGD Video Sets the onboard graphics as the first display.
NB PCIe Slot Video S ets the PCI Express graphics card on the PCI Express slot controlled by the
North Bridge as the first display. (Default)
SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
South Bridge as the first display.
& Integrated Graphics
Enables or disables the onboard graphics function.
The BIOS will automatically enable or disable the onboard graphics depending on
Auto
the graphics card being installed. (Default)
Disables the onboard graphics.
Disabled
Always activates the onboard graphics, whether or not a PCI Express card is
Force
installed.
& UMA Frame Buffer Size
This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G.
- 49 - BIOS Setup