Product Specifications - Gigabyte GA-F2A78M-D3H User Manual

1-2 Product Specifications
APU FM2+ Socket:
Š
-
-
(Go to GIGABYTE's website for the latest CPU support list.)
Chipset AMD A78
Š
Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
Š
Dual channel memory architecture
Š
Support for DDR3 2133/1866/1600/1333 MHz memory modules
Š
S upport for AMD Memory Profile (AMP)/Extreme Memory Profile (XMP) memory
Š
modules
( Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard Integrated Graphics Processor:
Š
Graphics -
-
-
-
Audio Realtek
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
Support for S/PDIF Out
Š
LAN Realtek
Š
Expansion Slots Š 1 x PCI Express x16 slot, running at x16 (PCIEX16)
(The PCIEX16 slot conforms to PCI Express 3.0 standard.)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
Š
1 x PCI Express x1 slot
Š
(The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)
1 x PCI slot
Š
Multi-Graphics Support for AMD Dual Graphics technology
Š
Technology Support for AMD Eyefinity technology
Š
Hardware Installation
AMD A series processors
AMD Athlon series processors
™
* D ue to a Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than the size of
the physical memory installed.
* T he maximum 64 GB of system memory can be supported using 16 GB (or above)
memory modules. GIGABYTE will update the memory support list on the official
website when the memory modules are available on the market.
1 x D-Sub port, supporting a maximum resolution of 1920x1200
1 x DVI-D port, supporting a maximum resolution of 2560x1600
* S upport for 2560x1600 resolution requires both a monitor and cable that support
Dual Link DVI.
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 4096x2160
* T he resolution of 4096x2160 can be supported when using an FM2+ APU; the
maximum resolution supported is 1920x1200 when using an FM2 APU.
* Support for HDMI 1.4a version.
Maximum shared memory of 2 GB
ALC887 codec
®
* T o configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
GbE LAN chip (10/100/1000 Mbit)
®
* F or optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
* To support PCI Express 3.0, you must install an FM2+ APU.
- 10 -