Bootup Numlock State; Security Option; Fast Boot; Usb Support - Gigabyte GA-F2A78M-D3H User Manual

& Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities
Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives,
and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that
presents the devices of the same type that are connected. This item is present only if at least one device
for this type is installed.
& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:
Enabled)
& Security Option
Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.
After configuring this item, set the password(s) under the Administrator Password/User Password item.
A password is only required for entering the BIOS Setup program.
Setup
A password is required for booting the system and for entering the BIOS Setup program.
System
(Default)
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup
speed. (Default: Disabled)
& VGA Support
Allows you to select which type of operating system to boot.
Enables legacy option ROM only.
Auto
EFI Driver Enables EFI option ROM. (Default)
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
& USB Support
All USB devices are disabled before the OS boot process completes.
Disabled
Full Initial All USB devices are functional in the operating system and during the POST.
P art of the USB devices are disabled before the OS boot process completes. (Default)
Partial Initial
This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is
set to Ultra Fast.
& PS2 Devices Support
All PS/2 devices are disabled before the OS boot process completes.
Disabled
Enabled A ll PS/2 devices are functional in the operating system and during the POST. (Default)
This item is configurable only when Fast Boot is set to Enabled. This item is disabled when Fast Boot is
set to Ultra Fast.
& NetWork Stack Driver Support
Disabled Disables booting from the network. (Default)
Enables booting from the network.
Enabled
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
& Windows 8 Features
Allows you to select the operating system to be installed. (Default: Other OS)
- 45 - BIOS Setup