Integrated Graphics - Gigabyte GA-F2A78M-DS2 User Manual

` GFX Configuration
& Primary Video Device
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGD Video
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto
Disabled
Force
` SATA Configuration
& OnChip SATA Channel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE
RAID
AHCI
& PORT0 Hot Plug~PORT3 Hot Plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATA Power on PORT0~SATA Power on PORT3
Enables or disables each SATA port. (Default: Enabled)
` Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port.
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
Sets the onboard graphics as the first display.
North Bridge as the first display. (Default)
The BIOS will automatically enable or disable the onboard graphics depending on
the graphics card being installed. (Default)
Disables the onboard graphics.
Always activates the onboard graphics, whether or not a PCI Express card is
installed.
Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
(Default)
- 26 -