Table of Contents
Advertisement
direction to highlight your desired Pinyin. Press the
scroll key to choose the highlighted Pinyin. Thus the
selected Pinyin can be displayed in the Pinyin window,
and the other Pinyin will disappear, and the candidate
list corresponding to this Pinyin can be activated
(numbering will be shown on each candidate, and the
first candidate is highlighted).
3
View candidate list to find out desired Chinese
character: when the candidate Chinese characters
exceed one line display, there will be up and down
arrows showing at the right end of the candidate list.
If you could not find a desired character in the current
list, you could scroll up or down to view the previous
line or the next line.
4
Input Chinese character: You can press the scroll key
or number key to input a candidate.
Press scroll key to input: Scroll to left or right to
•
highlight the desired candidate, and then press to
input this Chinese character.
Press number key to input: Directly press the
•
number key matching to the numbering of the
candidate character.
While your input candidate is inserted in the text input
window, the Chinese input window will be closed and
the predictive list will be shown at the same time.
5
Input predictive character: If the current line of
predictive character list does not show your desired
character, you could scroll down to view the next line
of predictive character list. Find your desired
character, if it locates in the first highlighted position
in the list, you could directly press the scroll key to
48
48
input it; otherwise, you could first scroll right to
activate the predictive character list (the characters in
the list will have numbering, meanwhile, the second
character in the list will be highlighted), then you
could either press the number key matching to the
predictive character numbering to input it, or scroll in
the relevant direction to find and highlight your
desired predictive character and then press the scroll
key to input it.
When you do not need the predictive list or you could
not find your desired Chinese character in the
predictive list, while the predictive list is not activated,
you could directly input the Pinyin for next Chinese
character. While the predictive list is already activated,
you have to press the right selection key to close the
predictive list first and then continue to input the
Pinyin for the next Chinese character.
Pinyin input example: To input characters for "Pinyin"
1
Enter into the text editing window for writing a text
message or any other possible position for inputting
Chinese character, and switch to Pinyin input mode.
2
Input the Pinyin letter pin for "pin": press 7, 4, 6 in
sequence, and finally input * once for the 1st tone.
3
Scroll right to highlight pin- and then press the scroll
key to activate the candidate list.
4
The character for "pin" will be shown in the candidate
list. If this character locates in the first highlighted
position of the candidate list, you could directly press
the scroll key to input it, otherwise, you should first
© 2010 Nokia. All rights reserved.
Advertisement
Table of Contents
