Remote Configuration - Nokia 6788i User Manual

Remote configuration

Select Tools
>
With Device manager, you can manage settings, data, and
software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select
profiles Options
>
You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name — Enter a name for the configuration server.
Server ID — Enter the unique ID to identify the
configuration server.
Server password — Enter a password to identify your
device to the server.
Access point — Select the access point to use for the
connection, or create a new access point. You can also
46
46
Utilities Device mgr..
> >
Options
New server profile.
>
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet
Host address — Enter the web address of the
configuration server.
Port — Enter the port number of the server.
User name and Password — Enter your user ID and
password for the configuration server.
Allow configuration — Select
initiate a configuration session.
Network authentication — Select whether to use HTTP
authentication.
Network user name and Network password — Enter
your user ID and password for HTTP authentication. This
setting is available only if you have selected
authentication
Server
To connect to the server and receive configuration settings
>
for your device, select
To view the configuration log of the selected profile, select
Options
>
Warning:
If you install a software update, you cannot use the device,
until the installation is completed and the device is
restarted. Be sure to back up data before accepting
installation of an update.
as the bearer type.
Yes
to be used.
Options Start
>
View log.
© 2010 Nokia. All rights reserved.
to allow the server to
Network
configuration.