HP ProLiant DL380 Quickspecs page 10

QuickSpecs
Standard Features
Packaged Cluster Packaged Cluster Packaged Cluster Packaged Cluster
Software Components Software Components Software Components Software Components
HP StorageWorks Secure HP StorageWorks Secure HP StorageWorks Secure HP StorageWorks Secure
Path Optional Software Path Optional Software Path Optional Software Path Optional Software
The Packaged Cluster utilizes a single, consistent set of utility software for storage and RAID
management, setup, configuration and troubleshooting. This consistency reduces the cost of ownership
by reducing the training and technical expertise necessary to install and maintain your HP server storage
solution.
Configuration Configuration Configuration Configuration
Array Configuration Utility (ACU) [On-line/Offline]
Array Configuration Utility (ACU 6) [On-line, Remote Web-Based & Off-line]
Option ROM Configuration for Arrays (ORCA)
Selective Storage Present (SSP)
ROM based set-up Utility (RBSU)
Management/Health Management/Health Management/Health Management/Health
HP Systems Insight Manager
SmartStart
Management Agents
Redundant ROM
Remote Flash ROM
Integrated Lights-Out Support
Remote Insight Lights-Out Edition
Automatic Server Recovery (ASR)
Active Update
ROMPaq, support software and configuration utilities
Survey Utility and diagnostics utilities
Drive Parameter Tracking
Dynamic Sector Repairing
Hot Spare Boot
NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the NOTE: NOTE: NOTE:
system will automatically reboot and use the remaining good processor(s).
Pre-Failure Notification (covers processors, SCSI hard drives and memory)
Optional ProLiant Essentials Value Packs: Rapid Deployment Pack, Workload Management Pack,
Integrated Lights Out
Optional Remote Management Packs: Integrated Lights-Out
Secure Path is a family of high availability multi-pathing software products providing continuous data
access from the MSA1000 to ProLiant servers running the Windows Server 2003, Windows 2000,
Windows NT, Linux and NetWare operating systems.
Redundant hardware, advanced RAID technology and Secure Path's automated failover capability are
used to enhance fault tolerance and availability. Secure Path effectively eliminates controllers, disk
drives, interconnect hardware and host bus adapters as single points of failure in the storage subsystem.
The attachment of non-Secure Path (single HBA) servers to an MSA1000 with dual controllers that has
servers with Secure Path (dual HBA) attached is supported where the operating systems are Windows or
NetWare. Users must realize that in event of a controller fail-over (failure of active controller) the single
path servers will lose access to their data on the MSA1000.
NOTE: NOTE: If Secure Path for Linux is used on any node or cluster attached to an MSA1000, all nodes must NOTE: NOTE:
also have Secure Path installed, regardless of operating systems.
NOTE: Refer to NOTE: NOTE: NOTE: http://www.hp.com/go/securepath
Key Features Key Features Key Features Key Features
DA - 12086 Worldwide — Version 35 — February 1, 2008
HP ProLiant DL380 Generation 4 (G4) Packaged Cluster HP ProLiant DL380 Generation 4 (G4) Packaged Cluster HP ProLiant DL380 Generation 4 (G4) Packaged Cluster HP ProLiant DL380 Generation 4 (G4) Packaged Cluster
for the latest Secure Path parameters.
Maintains connections to storage
Monitors I/O paths and alerts on significant events
with Modular Smart Array 1000 with Modular Smart Array 1000 with Modular Smart Array 1000 with Modular Smart Array 1000
Page 10