HP ProLiant DL760 Quickspecs page 8

QuickSpecs
Standard Features
System Fans System Fans System Fans System Fans
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Two Hot-Plug redundant fans ship standard. Two maximum supported.
For required cabling information, refer to the Web site at:
http://hp.com/products/servers/ProLiantDL760.
Microsoft Windows 2000
Microsoft Windows 2000 Advanced Server
Microsoft Windows Server 2003 (Standard, and Enterprise)
SCO UnixWare®
LINUX (Red Hat, SuSE)
VMware Virtualization Software
NOTE: NOTE: NOTE: For a more complete and up-to-date listing of supported OS's and versions, please visit our OS NOTE:
Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL760 G2, please NOTE: NOTE: NOTE:
see: http://h18023.www1.hp.com/support/files/server/us/index.html.
NOTE: NOTE: NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web NOTE:
site at http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
NOTE: For more complete and up-to-date information on how to buy server operating systems from HP NOTE: NOTE: NOTE:
please visit the OS product site at:
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware NOTE: NOTE: NOTE:
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION: CAUTION: CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
NOTE: NOTE: NOTE: NOTE: Allow a minimum of 48 in (121.92 cm) clearance beyond the front of your rack to permit server
installation and removal. This applies to both individual rack installations as well as when aligning rack
rows so that the front doors are facing each other.
DA - 11568 North America — Version 49 — March 27, 2006
HP ProLiant DL760 Generation 2 (G2) HP ProLiant DL760 Generation 2 (G2) HP ProLiant DL760 Generation 2 (G2) HP ProLiant DL760 Generation 2 (G2)
http://h18004.www1.hp.com/products/servers/software/OEM.html
Page 8