Drive Support - HP ProLiant ML150 Quickspecs

QuickSpecs
Storage
Non-Hot Plug SATA or Hot Plug SAS/SATA

Drive Support

Removable Media
SATA DVD-ROM Drive
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Supports up to eight (8) SAS/SATA hard drives via 2nd Hot plug Hard Disk Drive cage and HP Smart Array P410 Controller.
NOTE: The 2nd hot-plug hard drive cage requires the purchase of one 750W hot plug power supply, Redundant Power Supply
Enablement Kit and HP Smart Array P410 Controller (if not already part of the configuration).
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
3TB 3G SATA 7.2K
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
Quantity Position
Supported Supported
Up to 1 1
Quantity Position
Supported Supported
Up to 8 4,5
(Drive slots 1-8)
Quantity Position
Supported Supported
Up to 4 4
(Drive slots 1-4)
DA - 13249 North America — Version 33 — September 24, 2012
HP ProLiant ML150 Generation 6 (G6)
1 Optical Drive Media Bay
2 Media Bays
3 USB 2.0 ports (2)
4 Hard Drive Bays (1-4)
5 Hard Drive Bays (5-8)
Controller
SATA
Controller
Smart Array P212 Controller
Smart Array P410 Controller
Smart Array P411 Controller
Controller
HP Smart Array B110i SATA RAID Controller (RAID 0,1,10)
Smart Array P212 Controller
Page 34