Technical Data - Zanussi ZKH 7146 J User Manual

Problem
The machine does not dry or does
not dry properly:
The laundry is full of different col-
ored fluff:
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.

Technical data

Dimensions
Electrical connection
Voltage - Overall power - Fuse
22
The drying time or the dryness degree has not been selected.
• Select the drying time or the dryness degree.
The water tap is not turned on.
• Open the water tap.
The drain filter is clogged.
• Clean the drain filter.
The machine is overloaded.
• Reduce the laundry load in the drum.
The selected drying programme, time or dryness degree was not suitable for
the laundry.
• Select the suitable drying programme, time or dryness degree for the laun-
dry.
The fabrics washed in the previous cycle released fluff of a different color (refer
to "Fluff in the garments" in chapter "Use - Washing & Drying").
• The drying phase helps to eliminate some fluff.
• Clean the clothes with a fluff remover.
In case of an excessive amount of fluff in the drum repeat the following proce-
dure twice:
• Thoroughly clean the empty drum, the gasket and the door with a wet rag.
• Perform a rinse cycle.
• Put a wool or piled fabric rag inside the drum.
• Perform a drying cycle of 10 minutes.
• Remove the old wool cloth.
Now you can wash other garments.
Width
Height
Depth
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Possible cause/Solution
60 cm
85 cm
63 cm
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...