Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna K 970 Ring Operator's Manual

Symbols on the mac hine
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand the
instructions before using the machine.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the machine.
WARNING! Sparks may appear and start a
fire when you work with the machine.
Choke
Air purge
Decompression valve
Refuelling, petrol/oil mix
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Other symbols/decals on the mac hine
refer to special certification requirements for certain
markets.
2 –
English
KEY T O SYMBOLS
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
CAUTION!
NOTICE!
NO TICE! Used if there is a risk of damage to materials or
the machine if the instructions in the manual are not
followed.
W ARNING! Used if there is a risk of serious
!
injury or death for the operator or damage to
the surroundings if the instructions in the
manual are not followed.
CA UTION! Used if there is a risk of injury to
!
the operator or damage to the surroundings
if the instructions in the manual are not
followed.