HP 4320t Quickspecs page 20

QuickSpecs
Technical Specifications
Broadcom 4312G
802.11b/g WiFi Adapter
Humidity
Altitude
LED Activity
1. Check latest software/driver release for updates on supported security features.
2. Maximum output power may vary by country according to local regulations.
3. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a
packet error rate of 10% for 802.11a/g (OFDM modulation).
4. WLAN supplier's client utility is required for Cisco Compatible Extensions support with Microsoft
Windows XP. WLAN may also be compatible with certain third-party software supplicants. WLAN
supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows
Vista.
Wireless LAN Standards
Interoperability
Frequency Band
Data Rates
Modulation
1
Security
Sub-channels
Media Access Protocol
Network Architecture
Models
Roaming
2
Output Power (for CCK)
Output Power (for OFDM;
2
power varies by data rate)
Power Consumption
DA - 13613 North America — Version 7 — September 29, 2011
Operating
Non-operating
Operating
Non-operating
LED Off - Radio OFF; Solid LED On - Radio ON
IEEE 802.11b
IEEE 802.11g
Wi-Fi certified
Cisco Compatible Extensions Program compliantwith Microsoft Windows Vista
and XP (details at: http://www.hp.com/go/notebooks/WLAN)
2.4 GHz
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Direct Sequence Spread Spectrum
DBPSK, DQPSK, CCK, OFDM
Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated AES,
802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2,
LEAP, EAP-FAST.
Support for Cisco Security Features (proven compatibility with Cisco Aironet
infrastructure products through the Cisco Compatible Extensions Program
Version 4) with Microsoft Windows Vista and XP only.
Multinational support with frequency bands and channels compliant to local
regulations.
CSMA/CA (Collision Avoidance) with ACK
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
IEEE 802.11 compliant roaming between access points
17 dBm , nominal
15 dBm , nominal
Idle associated: 250 mW
Idle unassociated: 150 mW
Transmit: 2.0 W (max)
Receive: 2.0 W (max)
HP 4320t Mobile Thin Client
10% to 90% (non-condensing)
5% to 95% (non-condensing)
0 to 10,000 ft (3,048 m)
0 to 50,000 ft (15,240 m)
Page 20