HP 4320t Quickspecs page 10

QuickSpecs
Memory
DDR3 PC3-10600 SDRAM (1333 MHz)*
Two SODIMM slots supporting dual-channel memory
SODIMM sizes supported: 1 GB, 2 GB, 4 GB
Standard Memory
Optional Memory
Upgrades
Up to
2 GB
2 GB
3 GB
4 GB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. With Windows 32-bit operating systems, the amount of usable memory is
dependent upon your configuration, so that above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades
1 GB (1 GB x 1)
2 GB (1 GB x 2)
2 GB (2 GB x 1)
3 GB (2 GB + 1 GB)
4 GB (2 GB x 2)
Support for up to 4 GB of memory with the installation of optional DDR3 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both
memory slots.
HP 1 GB (DDR3 1333 MHz) SODIMM
HP 2 GB (DDR3 1333 MHz) SODIMM
HP 4 GB (DDR3 1333 MHz) SODIMM
DA - 13613 North America — Version 7 — September 29, 2011
Slot 1
1 GB
2 GB
2 GB
2 GB
HP 4320t Mobile Thin Client
Slot 2
1 GB
--
1 GB
2 GB
AT911AA
AT912AA
AT913AA
Page 10