Table of Contents
Advertisement
3
Click Add. The Add IP Filter Outgoing screen opens.
4
In the Filter Name field, enter the name of the filter.
Note: You cannot use blank spaces in the filter name.
5
In the Protocol field, select one of the following protocols:
TCP/UDP
TCP
UDP
ICMP
6
In the Source IP address field, enter the source IP address for the server sending
the incoming packets.
7
In the Source Subnet Mask field, enter the subnet mask for the server sending the
incoming packets.
8
In the Source Port field, enter the port number for the server sending the
incoming packets. Use the following format: port or port:port.
9
In the Destination IP address field, enter the destination IP address for the server
receiving the packets.
10 In the Destination Subnet Mask field, enter the subnet mask for the server
receiving the packets.
11 In the Destination Port field, enter the port number for the server receiving the
packets. Use the following format: port or port:port.
12 Click Save/Apply to add the filter.
4036168 Rev A
Outgoing IP Filtering
183
Advertisement
Table of Contents
