Table of Contents
Advertisement
Chapter 4 DSL Configuration
To Test the Quality of the DSL Connection
The ADSL Bit Error Rate (BER) will report the quality of the ADSL connection. The
ADSL BER test results will show how many bits are sent and are erred among them.
To test for quality of the DSL connection:
1
Click DSL on the main screen.
2
Click the Statistics tab.
3
Click ADSL BER Test.
4
Enter the duration of the test in seconds for the Tested Time (sec).
5
Click Start to start the test.
To Reset DSL Statistics
To reset the statistics, click Reset Statistics button. This action will clear the numbers
and restart the calculation.
94
4036168 Rev A
Advertisement
Table of Contents
