Viewer Utility Settings; Settings - Hawking HNC290G User Manual

7.8 Viewer Utility Setting
Click the Setting button
Note: When you want to change settings such as the IP Address, Video Port, etc. in the "Setting" option, you must first
disconnect the camera by clicking the Stop button.
7.8.1 Setting
Setting
Name
IP Address
Video Port
Model
Motion Record
Username
Password
Discover
. The camera's setting window will then appear.
It is not required that you fill in a camera name in order to connect to
the camera. It is only for users to identify the camera.
IP address/Domain name of the network camera.
The number of the service port used by the network camera.
Select "MJPEG Camera". (This camera only supports Motion JPEG).
Check this box to enable motion-triggered recording. Whenever the
camera detects motion, it will trigger a 30-second video recording. The
user is not able to change the duration of this recording. The period is
always 30 seconds.
The user name for logging into the network camera. By default, the
user name is "Admin".
The password for logging into the network camera. By default, the
password is "1234".
Click "Discover" and the camera's auto-discover window will appear. The
window will show all the discovered cameras on the LAN environment for
you to select.
45