Network Settings - Hawking HNC290G User Manual

6.2.1 Network Setting

Network Settings

Network Camera Name
IP Address
Subnet Mask
Gateway
DNS Server
The default camera name is "HNC290G". It is recommended that you
give the camera a name that will be easy to remember, such as by
location, application, etc.
Enter an unused IP Address that is consistent with and inside the IP
address range used on your LAN. If the IP Address range of your LAN
is from 192.168.2.1 to 192.168.2.254, an example of an unused IP
address within this range might be: 192.168.2.250.
The Subnet Mask field must match the subnet setting on your LAN. For
example: 255.255.255.0.
The Gateway (usually the router on your LAN) is used to forward frames
to destinations in a different subnet on the Internet. The Gateway setting
must be the same as the gateway used by the PCs on your LAN.
The DNS Server (Domain Name Server) translates names to IP
addresses. The DNS Server setting is the same as the setting for the
PCs on your LAN.
22