Tools - Hawking HNC290G User Manual

6.2.10 Tools

Tools
Firmware Version
Firmware Update
Reset to Default
LED Light Off
Displays the current version of the firmware.
Users cannot use the Admin utility to upgrade the firmware in this
version of the utility. Please upgrade the firmware via the web user
interface.
If you want to reset the camera to its default settings, click this button.
The default settings of the camera are as follows:
Camera Name: "WIPCamera_MJPEG"
IP Address: "192.168.2.3"
Subnet Mask: 255.255.255.0
Administrator Name: "Admin"
Password: "1234"
Video Port: "5000"
Web Port: "80"
Users can click on this button to turn off the camera's LED lights. This
may help to make the camera less noticeable or to give it the
impression that it is not in use when, in fact, it is.
35