Sleep Mode; Maintenance - iHome iP10 Instruction Manual

S N O O Z E / D I M M E R O P E R A T I O N
1. To program a custom snooze duration, during normal operation (when
alarm is not sounding) press and hold the Snooze/Dimmer Button until
the display flashes, then press the + and – Buttons on the unit to adjust
the snooze time to 1 - 29 minutes.
2. Press the Snooze/Dimmer Button on the iP10 after the alarm sounds.
The alarm will be silenced and will come on again in about 9 minutes
(default). You may repeat this cycle several times during the one hour
alarm cycle.
3. During normal operation (when alarm is not sounding), press the
Snooze/Dimmer Button to control the brightness (high, medium, low
and off settings) of the LCD display.
S L E E P
Sleep mode lets you sleep to your docked and playing iPhone or iPod
Press the Sleep Button as needed to cycle to the desired sleep duration:
120, 90, 60, 30 or 15 minutes or OFF (turns sleep mode off). Press the
Volume Buttons on the unit to adjust sleep listening level. The unit will
revert to normal volume level when sleep mode ends. Press the Sleep
Button during sleep to view the remaining sleep time; press again to set
sleep to next (lower) sleep duration.
M A I N T E N A N C E
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials can
damage the surface of the unit.
M O D E
8