S E T T I N G A N D U S I N G T H E A L A R M - iHome iP10 Instruction Manual

S E T T I N G A N D U S I N G T H E A L A R M

SETTING THE ALARM
This unit lets you wake to your docked iPhone, iPod or to the built-in
buzzer alarm. The alarm will sound for 60 minutes or until reset/turned
off.
1. Press and hold the
2. Press the + or – Buttons to adjust the display to the desired alarm time (hold
for rapid adjustment). Remember to set the correct AM or PM alarm time.
3. Press the
indicator will flash on the display. Press the + or – Buttons to toggle
between wake to iPod or buzzer, then press the
access volume setting for the selected alarm source.
Wake to iPod:
Wake to Buzzer:
4. Press the
icon will appear on the display, indicating that the alarm is set and armed.
Reviewing and Resetting the Alarm
Press and release the
alarm settings. To toggle the alarm on or off, press the
needed. When the alarm icon is displayed, the alarm is armed/on.
Press the Power Button or
to reset it to come on again at the same time the next day. Press the
Button again to turn off/disarm the alarm. The alarm icon
Alarm Button until the alarm time display flashes.
Alarm Button to confirm the alarm time. The WAKE-TO
If wake to iPod is selected, press the + or – Buttons to
set the iPod volume (can be set from 5- 40). The alarm
will wake you to the last track played on your iPhone or
iPod
If wake to Buzzer is selected, press the + or – Buttons to
choose HI or LO buzzer alarm volume.
Alarm Button to exit and confirm alarm settings. An alarm
Alarm Button at any time to review the current
Alarm Button when the alarm is sounding
Alarm Button to
Alarm Button as
Alarm
will disappear.
7