Table of Contents
Advertisement
Chapter 4
Browser Interface
You may monitor and control a UPS system with an UPS SNMP/Web Adapter using an Internet browser.
The UPS Adapter generates navigable HTML pages. The HTML pages are updated to match the UPS's status every 30 seconds;
the browser refreshes the displayed information automatically. To update the information on a page sooner, have your browser
reload the page.
Establishing a Connection
To connect to the UPS Adapter:
1.
Start your browser.
2.
In the Address field, enter the following:
http://IP_Address
Where IP_Address is the IP Address of the UPS Adapter.
e.g.
http://192.168.1.1
3.
The Log On Page will then appear.
To Log On to the UPS Adapter
The first page your browser will display is the Log On Page. To continue to the UPS Adapter's other Web pages:
1.
If you have not configured your UPS Adapter to require a user name or password for access, simply hit the Submit Logon
button to continue.
2.
If your Web Card is configured to require a user name and/or password for access, enter them here before hitting the Submit
Logon button to continue.
Navigating the UPS Adapter's Web Pages
After you have passed the Log On page, your browser will display a Navigation Bar on the left of your browser window. This
Navigation Bar contains links to the different interface pages accessible through your browser, described in the following section.
Initially, the right side of your browser window will display the Status Page by default. To load another page in this area, click on
that page's Navigation Bar link.
Note: You may input values on some of the UPS Adapter's pages. After typing in values on one of these pages, you MUST hit the
Submit button at the bottom of the page to send the values to the UPS Adapter.
11
Advertisement
Table of Contents
