Peripherals - Gigabyte GA-990XA-UD3 User Manual

2-6

Peripherals

& Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card.
Sets the PCI Express graphics card on the PCIEX16 slot as the first display. (Default)
PCIe 1 Slot
Sets the PCI Express graphics card on the PCIEX8 slot as the first display.
PCIe 2 Slot
Sets the PCI Express graphics card on the PCIEX4 slot as the first display.
PCIe 3 Slot
PCI 1 Slot Sets the PCI graphics card on the PCI1 slot as the first display.
PCI 2 Slot Sets the PCI graphics card on the PCI2 slot as the first display.
& VIA 1394 Controller
Enables or disables the onboard IEEE 1394 function. (Default: Enabled)
& OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type (SATA3 0~SATA3 3 connectors)
Enables or disables RAID for the SATA controllers integrated in the AMD Chipset or configures the SATA
controllers to RAID mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& OnChip SATA Port4/5 Type (SATA3 4~SATA3 5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating
mode of the integrated SATA3 4~SATA3 5 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings.
IDE D isables RAID for the SATA controller and configures the SATA controller to IDE mode.
(Default)
- 47 - BIOS Setup