Battery Removal - Rowenta Epilator Instructions Manual

- insert the new band by slotting the fins
(b) of the exfoliator unit in the groove of
the band and pushing until it clicks!
(fig.30). Put the exfoliator head back
into place (fig.31).
9 • Storage
Set the switch to position "0" before
storing.
IIf the appliance remains unused for
some time, the batteries become
empty and the appliance must then be
recharged.
10 • Environment protection first
Your appliance contains many
materials that can be reused or
recycled. This appliance contains NI Mh
batteries. Respect the environment and
do not throw used batteries away with
household waste.
Before disposing of your product at
the end of its life, remove
the batteries
11 • Battery removal
Remove the plug adapter and let the
motor run until the batteries are
completely discharged.
Remove the epilator head (fig.22).
GUARANTEE
Your appliance is designed for use in
the home only. It should not be used
for professional purposes. Any
commercial use, inappropriate use or
failure to comply with the instructions,
IMPORTANT
Do not clean the band under
running water (fig.27) .
IMPORTANT
The appliance should be stored in
an area where the temperature is
between 15 and 30°.
and take them to one of the collection
points provided for this end. You can
also leave your appliance at a Rowenta
approved service centre, which will
deal with it.
Open the appliance by pulling firmly on
the two casings and recover the
batteries, unplugging the connector.
the manufacturer accepts no responsi-
bility and the guarantee will not apply.
The guarantee becomes null and void
in the case of improper usage.
GB
5