Belkin N1 MIMO User Manual page 37

Troubleshooting
3. The exact window that opens will vary depending on the
model of wireless card you have; however, any of the
utilities should have a list of "Available Networks" .
Available networks are wireless networks to which you can
connect. If you are using a Belkin 802.11g (G Plus) Router, or
Belkin 802 . 1 1g (54g) Router, "Belkin54g" is the default name .
If you are using a Belkin 802 . 1 1b Router, the
default name should be "WLAN".
If you are NOT using a Belkin Router, please consult your
router manufacturer's user manual for the default name .
The name of your wireless network appears in
"Available Networks".
If the correct network name is listed in the "Available Networks"
list, please follow the steps below to connect wirelessly:
1. Click on the correct network name in the "Available
Networks" list .
2. If the network has security (encryption) enabled, you
will need to enter the network key . Click "Connect" .
For more information regarding security, see the page
entitled: "Securing your Wi-Fi Network" on page 21 of
this User Manual .
3. Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating
a successful connection to the network .
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support .
English 35
1
2
3
4
5
6