Belkin N1 MIMO User Manual page 33

Using the Belkin Wireless Networking Utility
WARNING: I f you are using a wireless client to turn on the security settings in your wireless
router (or access point), you will temporarily lose your wireless connection until
you activate security on your wireless client . Please record the key prior to
applying changes in the wireless router (or access point) . If you don't remember
the hex key, your client will be locked out of the wireless router (or access point) .
WPA-PSK (no server)
Choose this setting if your network does not use a radius server . WPA-
PSK (no server) is typically used in home and small office networking .
1.
From the "Network Authentication" drop-down
menu, select "WPA-PSK (no server)" .
2.
Enter your network key . This can be from eight to 63 characters and can
be letters, numbers, or symbols . This same key must be used on all of the
clients (network cards) that you want to include in your wireless network .
English 31
3.
Click "Save" to finish .
You must now set all
clients (network cards)
to match these settings .
1
2
3
4
5
6