2.4.4
Removing and Installing the CPU fan and
heatsink assembly
The system package includes a proprietary CPU fan and heatsink assembly
to ensure optimum thermal condition and performance.
DO NOT replace the proprietary CPU fan and heatsink with other models!
To remove the CPU fan and heatsink assembly:
1.
Disconnect the CPU fan cable.
2.
Loosen the CPU fan and
heatsink assembly screws.
To reinstall the CPU fan and heatsink assembly:
Reinstall the CPU fan and heatsink assembly, then reconnect the CPU
fan cable to the CPU fan connector on the motherboard.
Refer to the figure below for the location of the CPU fan connector on
the motherboard.
CPU FAN Connector
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
2-6
3.
R
Lift the CPU fan and heatsink
assembly, then set aside.
CPU_FAN
Chapter 2: Basic installation