Installing The Keyboard Batteries - Fujitsu FPCKC18A1P User Manual

Installing the Keyboard Batteries

To install or replace the batteries in your wireless keyboard:
1. Shut off the keyboard using the switch on the top edge
of the keyboard. (Figure 3)
2. Remove the wireless keyboard battery compartment
cover by sliding the cover towards the edge of the key-
board (Figure 1).
3. If there are old batteries installed, remove them and
dispose of them in accordance with local regulations.
4. Insert the batteries that came with your keyboard or
four new AAA-type alkaline batteries into the battery
tray. Be sure to observe correct polarity.
5. Replace the battery compartment cover.
2
Before installing or replacing the batteries in
your keyboard, be sure to note the following:
• Ensure that the correct polarities (+ and -)
are used when installing new batteries in the
keyboard.
• Don't mix old and new batteries.
• If the keyboard won't be used for a long
period, remove the batteries to prevent elec-
trolyte leakage. If the batteries leak, clean
out the battery compartment with a damp
cloth, then dry thoroughly.
• Handle the batteries carefully, and dispose of
old batteries in accordance with local regula-
tions.