Using The Record Menu; Setting The Scene Mode - HP c200 User Manual

Using the Record Menu

In Photo mode, access to the Record menu is done by simply by pressing the Menu button
camera.
When the menu is displayed, use the 4-way navigation control and the OK button
selections and apply the desired settings. To close the menu anytime, press the menu button again.
Record Menu
The Record menu allows changes to the scene modes, and
setup other capture settings.
To go to Record Menu:
1. Press Menu button
2. Use the or
3. To select an item, press
4. Change the submenu settings using the 4-way navigation control.
5. Press the OK button

Setting the Scene Mode

This camera offers 31 different modes, that can assist in taking a photo with the optimal settings or desired effects.
1. From the Record Menu, enter the
menu.
2. Use the left and right navigation controls to move
through the selections.
3. The highlighted scene mode will either have text that describes the benefits of the mode or have a side-by-side
photo comparison that illustrates the benefits. The photo on the left is a typical auto mode result and the photo
on the right illustrates the benefit of selecting that scene mode. It is important to note that by selecting a
particular scene mode (other that Auto) will take the camera out of it's normal automatic settings capabilities and
therefore optimise various settings that match a specific scene.
4. Press the OK button
It is important to return the camera to the Auto mode when finished shooting
specifics conditions. This will reduce the risk of taking a bad photo in normal
situations.
to launch the Record Menu.
keys to move through the menu
.
to save and apply settings.
Scene Mode options
to save and activate the selected scene mode.
30
on back of the
to move through menu