Selecting the Temperature
CONSULT The gArmeNT'S LABeL FOr TemperATUre INSTrUCTIONS.
We reCOmmeND USINg The ChArT BeLOW AS A gUIDe.
Temperature Control Settings
acetate
elastane
polyamide
polypropylene
•
plug the iron into a grounded electrical outlet. The iron will begin to heat.
•
To adjust the temperature settings, turn the Temperature Control
Dial clockwise and select the temperature setting according to the
recommendation on the garment label. The Temperature Indicator light will
glow.
•
When the selected temperature is reached, the Temperature Indicator light
will turn off. The iron is ready to use.
Turning the Iron Off
•
To turn the iron off, unplug the iron.
NOTE: Never yank the cord to disconnect from outlet. Always grasp plug and
pull to disconnect.
6
polyester
cotton
silk
linen
triacetate
viscose
wool
IRONING YOuR GARMENTS
Dry Ironing
•
To iron without steam, turn the variable Steam Control Dial to the "no steam"
position
.
•
••
•
Select the desired temperature (
,
•
To iron garments with a dry iron, SINger recommends using this iron with an
empty water tank.
Steam Ironing
WARNING: Never IrON Or STeAm CLOTheS WhILe TheY Are BeINg
WOrN. Never DIreCT The STeAm JeT AT peOpLe Or ANImALS.
•
Fill the water tank as described in "Filling the Water Tank" section.
•
plug the iron into a grounded electrical outlet. The iron will begin to heat.
•••
•
Select the
or MAX temperature setting by turning the Temperature
Control Dial clockwise.
•
When the selected temperature is reached, the Temperature Indicator light
will turn off. The iron is ready to use.
•
Select the desired steam pressure on the variable Steam Control Dial.
•
When the selected temperature is reached, the Temperature Indicator light
will turn off. The iron is ready to use.
TIP: The tougher the wrinkle, the more steam you will need.
dry iron setting
•••
, or
).
steam iron setting
7