CHAPTER 2 HARDWARE INSTALLATION AND
SOFTWARE CONFIGURATION
2.1 SYSTEM REQUIREMENT
A computer with a network card with Ethernet interface.
2.2 HARDWARE INSTALLATION
2.2.1 HARDWARE CONNECTION
To go online and make phone calls simultaneously, please refer to Appendix B: SPLITTER CONNECTION.
2.2.2 INSTALLATION STEPS
1.
Connect line port 8 of the ADSL MODEM to telephone jack with the telephone cord that comes with the
modem.
2.
Connect Ethernet port7 of the ADSL MODEM to 10/100BASE-T port of the computer using the network
cable that comes with the modem.
3.
Plug in the power cord, and turn on the power 9.
UT300-R Ethernet ADSL MODEM USER MANUAL
Figure 2.1
- 6 -